133 Series

Reference: 133 Series

Features / Specifications

  • Low Profile Recessed Model
  • ECE Approved
  • IP67 Rated
  • Dual Voltage 12/24 Volt
  • Blister Pack Contains Grommet/Plug
  • 113mm x 160mm x 12mm (Grommet)
  • 5 Year Warranty

Fitting Instructions

Retrofit lamps. If this is a new installation, fit a grommet or flange into the cutout (cut out 139 x 91mm, with a 23mm radius). Plug the 53102 wire into a lamp, run it through the back, and push it into the grommet or flange. Please refer to ADR 13/00 for mounting instructions.

Download Data Sheet

Technical Drawings

Please contact our Customer Service team for all sales enquiries.

Phone: 1800 815 000
Email: [email protected]
Part Numbers
Function Stop/Tail/Reflector
Part No. HD Harness
133RMG Includes Grommet & Plug, Single Blister ✓ (Requires P/N: 3PFSTB)
.
.
.
LED Qty 4
Cable P/N: 53102
(Bare Wires - Included in Blister, or Sold Separately)

P/N: 3PFSTB
(CSB Plug - Sold Separately)
.
Draw Stop Tail
@13.8V 0.10A 0.03A
@28V 0.05A 0.02A
.
Approvals Function Approval No.
ECE Stop/Tail/Reflector R1-S1-E9-02IB.22025
CTA Stop/Tail/Reflector CTA-060265
Function Rear Indicator/Reflector
Part No. HD Harness
133AMG Includes Grommet & Plug, Single Blister ✓ (Requires P/N: 2PFIB)
133AMB Lamp Only (No Grommet/Plug), Single Bulk ✓ (Requires P/N: 2PFIB)
.
LED Qty 4
Cable P/N: 53102
(Bare Wires - Included in Blister, or Sold Separately)

P/N: 2PFIB
(CSB Plug - Sold Separately)
.
Draw Indicator
@13.8V 0.10A
@28V 0.05A
.
Approvals Function Approval No.
ECE Indicator/Reflector 2a-E9-02IB.11331
CTA Indicator/Reflector CTA-060216
Function Reverse/Reflector
Part No. HD Harness
133WMG Includes Grommet & Plug, Single Blister ✓ (Requires P/N: 2PFRB)
.
.
LED Qty 16
Cable P/N: 53102
(Bare Wires - Included in Blister, or Sold Separately)

P/N: 2PFRB
(CSB Plug - Sold Separately)
.
Draw Reverse
@13.8V 0.33A
@28V 0.10A
.
Approvals Function Approval No.
ECE Reverse/Reflector 00 AR-E9-02IB.1060
CTA Reverse/Reflector CTA-060262
133 Series

You might also like