Frequently Asked Questions

1. What is the wiring diagram/configuration for our lamps?

Here at LED Autolamps, we try to keep the wiring of our products as easy as possible. To do that we have set a colour to each wire to match individual lamp functions. 

White = Earth/Ground
Red = Stop/Power Function
Brown = Tail/Park/Marker Function
Yellow = Indicator/Left Indicator Function
Green = Indicator/Right Indicator Function
Black = Reverse Function
Back of Blister Example

2. What is the pin diagram/configuration of our trailer plugs?

7 Pin Large Round 12 Volt Trailer Plug.

7 Pin Small Round 12 Volt Trailer Plug.

7 Pin Flat 12 Volt Trailer Plug.

7 Pin Heavy Duty 24 Volt Trailer Plug.

3. What is the pin diagram/configuration of our cable system plugs?

2 Core Cable.

5 Core Cable.

7 Core Cable.

4. What is the pin diagram/configuration of our EBS/ABS plugs & sockets?

5. What is ADR and ECE?

The Australian Design Rules (ADRs) are national standards for vehicle safety, anti-theft and emissions. The ADRs are generally performance based and cover issues such as occupant protection, structures, lighting, noise, engine exhaust emissions, braking and a range of miscellaneous items. They are largely based on and actively harmonised with the United Nations Economic Commission for Europe (ECE) regulations declared by the World Forum for Harmonization of Vehicle Regulations.

The ADRs use only the technical requirements of the ECE Regulations; the ECE system of type approval is not used. Instead, the ADRs are administered according to a self-certification system manufacturers do not seek government-sanctioned testing or approval; rather, they certify that their vehicles and regulated vehicle components comply with all applicable provisions of all applicable ADRs in effect on the date of manufacture. Both ADR and ECE approvals are legal for road use in Australia.

For more information regarding ADR, visit the Australian Department of Infrastructure and Regional Development website. For correct mounting instructions, visit the Australian Legislation website under ADR 13/00 - Installation of Lighting and Light Signalling Devices.

6. How does our LED Conversion Patch Lead System work?

Our patch lead system is designed to allow simple and easy conversion from traditional incandescent globes to modern LED rear lighting on popular ute/tray and truck models. This system is very flexible and mostly plug n play meaning no crimping or soldering depending on the setup you desire. Below are a few examples of how you can use this system on your vehicle. If you require any further assistance, please call or email us.

1. Using prewired lamp and patch lead to vehicle loom.

2. Using prewired lamp and hard wire to vehicle loom.

3. Using LED lamp with bare ends and patch lead to vehicle loom.

4. Using LED lamp with bare ends and hard wired to vehicle loom.

7. How to remove lens from 80/100/125 Series lamps.