- New
11 Series with AMP Plug
Reference:
120034 Series with AMP Plug
Features / Specifications
|
Fitting InstructionsRemove backing from 3M tape on the back of the lens, and run wires through the hole in the mounting surface. Apply firm hand pressure to ensure lamp adhesion. Use provided screws to secure the lamp further. Refer to ADR 13/00 for mounting instructions. |
| Downoad Data Sheet |
Technical Drawings |
Please contact our Customer Service team for all sales enquiries.Phone: 1800 815 000 |
|
| Function | Front Indicator | |||
 |
||||
| Part No. | ||||
| 11CAT1M-3AMP | 12-24 Volt, Bulk | |||
| . | ||||
| LED Qty | 3 | |||
| Cable | 25cm with AMP Plug | |||
| Draw | ||||
| @13.8V | 0.07A | |||
| @28V | 0.05A | |||
| . | CTA | |||
| ECE Approved | 060266 | |||
| Function | Front Position | |||
 |
||||
| Part No. | ||||
| 076SLKIT002 | 12-24 Volt, Bulk | |||
| . | ||||
| LED Qty | 3 | |||
| Cable | 25cm with AMP Plug | |||
| Draw | ||||
| @13.8V | 0.07A | |||
| @28V | 0.05A | |||
| . | ||||
| . | ||||
120034 Series with AMP Plug
4 other products in the same category:
Features / Specifications
|
Fitting InstructionsRemove backing from 3M tape on the back of the lens, and run wires through the hole in the mounting surface. Apply firm hand pressure to ensure lamp adhesion. Use provided screws to secure the lamp further. Refer to ADR 13/00 for mounting instructions. |
| Downoad Data Sheet |
Technical Drawings |
Please contact our Customer Service team for all sales enquiries.Phone: 1800 815 000 |
|